What is WPC Materials

The wooden plastic board is a wood -based material as the processing assistant, so as to make high -tech green environmental protection new decorative materials. It also has the performance and characteristics of wood and plastic. The problem also has the effects of insect -proof and termites. There are more colors that can be selected. The plasticity is strong, and the sound absorption effect is good.

Construction process: First measure the location of the wooden plastic plate, plan, and draw graphics. Before construction, ensure that the concrete basement of the construction site should be flat, and the corresponding glue, solidaries on the figure, and finally pressing the surface evenly.

What should I pay attention to when the construction of the wooden plastic board

1. Preparation before the construction of wooden plastic flooring, before construction, ensure that the concrete grassroots floor of the construction site should be flat. This is very important. I hope everyone will not be able to build it for saving. Otherwise, the cost will be greater than you save.

2. The center distance of the keel is controlled between 310-41mm, and the keel keel's end-connecting seam needs to leave a spacing of about 10mm to facilitate drainage. At the same time A straight line. The spacing of the keel allows errors <10mm, flatness "3mm, and the telescopic joints seen with the wall are 8-10mm.

3. Poor construction conditions at the grassroots level at the construction site and when the overall structure cannot be achieved, the steel keel must be used instead of wooden plastic keel. The galvanized steel just used is used. Essence

4. The size of the floor stitching gap should be reasonably determined according to the temperature and humidity, floor length, floor water content, and laying area according to the environment of the wood -plastic floor installation.